[. . . ] 23
Sales and Support Information
Customer Care Centre ⢠Or go on line through our Internet ⢠For customers within the UK: Accessory ordering application at 08705 357357 www. ¢ Most major credit and debit cards ⢠For customers within the Republic of accepted. Ireland: 01 289 8333 ⢠Visit our website for product information ⢠All enquiries transactions and distribution ⢠E-mail: customer. ¢ For UK, ROI: 08701 505610 ⢠Also available through our Internet is Direct Sales at Panasonic UK direct shopping for a wide range of ⢠Order accessory and consumable items finished products, take a browse on our for your product with ease and website for further details. [. . . ] Water Water pressure
O-ring
O-ring
When the O-ring is crushed by water pressure, the surface of the O-ring expands and the Case is sealed more tightly. The O-ring prevents water leakage by coming into uniform contact with the sides of the Case. Book 10 ãã¼ã¸
ï¼ï¼ï¼ï¼å¹´ï¼æï¼ï¼æ¥ãæææ¥ãååï¼ï¼æï¼å
Preparation -Setting the O-ringBe sure to set the O-ring before attaching a digital camera. ¥ Loosen part of the O-ring with the tips of two fingers and then lift the loosened
part. O-ring O-ring
â« Note ⥠Do not use a pointed object to remove the O-ring. Book 11 ãã¼ã¸
ï¼ï¼ï¼ï¼å¹´ï¼æï¼ï¼æ¥ãæææ¥ãååï¼ï¼æï¼å
2
Check the O-ring. ¥ Check that there is no dirt, sand, hair, dust, salt crystals, lint or old grease on
the O-ring. 3Dirt
3Sand
3Hair
3Dust
3Salt crystals
3Lint
⥠There may be dirt on the O-ring that you cannot see. ¥ Be careful not to leave any fibers from the dry cloth on the O-ring when wiping it. ¥ Check that the O-ring is not ripped, twisted, squashed, frayed or scratched and
that there is no sand sticking to it. 3Ripped
3Twisted
3Squashed
3Frayed
3Scratched
3Sand sticking
3
Inspect the O-ring groove. Â¥ Grains of sand or hardened salt crystals may get into the O-ring groove. If you use a cotton swab, be careful not to leave any fibers from it in the O-ring groove. Book 12 ãã¼ã¸
ï¼ï¼ï¼ï¼å¹´ï¼æï¼ï¼æ¥ãæææ¥ãååï¼ï¼æï¼å
Preparation -Setting the O-ring- (continued) 4 5
Inspect the opposite side of the O-ring in the same way. ¥ Apply a rice-grain size of grease (supplied) evenly to the O-ring with the tip of
your finger. ¥ Dirt or dust will stick to the O-ring if you apply too much grease. If you use other types of grease, the
surface of the O-ring may be damaged causing water leakage. Check the following: ⥠There is no dirt sticking to the O-ring. Book 13 ãã¼ã¸
ï¼ï¼ï¼ï¼å¹´ï¼æï¼ï¼æ¥ãæææ¥ãååï¼ï¼æï¼å
7
Inspect the O-ring one last time. Check the following one more time: ⥠There is no dirt sticking to the O-ring. ¥ There are no scratches or squashed parts on the O-ring. Thoroughly wipe any grease off your hands with a dry cloth and then wash your hands with water. [. . . ] « Notes ⥠Do not wash the Case with high-pressure water as it may cause water leakage. ¥ Do not leave the digital camera inside the Case when storing it. Caution for Use
â« Handling of the O-ring
⥠Do not use alcohol, thinner or a chemical cleaning agent for cleaning the
O-ring. ¥ If you will not be using the Case for a long period of time, remove the O-ring
from the O-ring groove, apply a thin coat of grease (supplied), place it in a clean polyester bag and then store it in a cool, dark place to prevent the surface from being damaged. [. . . ]